Search
Filters
Close

Barrel Engraving (AR Only)

Have your X-Caliber AR Barrel custom engraved! Max 20 Characters (rear) Max 6 Characters (front) 5 Fonts Available! PLEASE READ THE OVERVIEW BELOW FOR MORE DETAILS, CONDITIONS AND RESTRICTIONS.
*
*
*
*
$80.00

X-Caliber will not perform engraving of anything copyrighted, trademarked, profane/expletive or rude (up to our discretion)

 

*20 characters or less (area between chamber and gas block)

*6 characters or less (area in front of gas block)

Potentially less, depending on engraving locations combined with some gas-length and barrel-length combinations.

*Only compatable with straight fluting options

*Not available on Lightweight Contour or Spaghetti Contour.

*For AR9 and AR45 Barrels, please select orientation (TOP, BOTTOM, LEFT, RIGHT), but leave the Front/Rear option on REAR (we will center this since the AR9 & AR45 barrels have no gas block).

  

Normally our AR barrels are engraved with chambering and twist-rate information at the bottom between the gas block and muzzle.  If you select this location to have your engraving, we will move the chambering and twist rate information back to the bottom of the shank (chamber).

 

Adds up to 1 week lead time.

 

NOTE ABOUT ENGRAVING A BARREL WITH FLUTING: We will not engrave in any location where fluting exists.  If in doubt, please contact us.

 

NOTE: This page is currently a work in progress, and it is subject to change frequently until this notice is removed.  If you have any questions, concerns or uncertainties about our engraving options, please call first before placing an engraving order.

X-Caliber will not perform engraving of anything copyrighted, trademarked, profane/expletive or rude (up to our discretion)

 

*20 characters or less (area between chamber and gas block)

*6 characters or less (area in front of gas block)

Potentially less, depending on engraving locations combined with some gas-length and barrel-length combinations.

*Only compatable with straight fluting options

*Not available on Lightweight Contour or Spaghetti Contour.

*For AR9 and AR45 Barrels, please select orientation (TOP, BOTTOM, LEFT, RIGHT), but leave the Front/Rear option on REAR (we will center this since the AR9 & AR45 barrels have no gas block).

  

Normally our AR barrels are engraved with chambering and twist-rate information at the bottom between the gas block and muzzle.  If you select this location to have your engraving, we will move the chambering and twist rate information back to the bottom of the shank (chamber).

 

Adds up to 1 week lead time.

 

NOTE ABOUT ENGRAVING A BARREL WITH FLUTING: We will not engrave in any location where fluting exists.  If in doubt, please contact us.

 

NOTE: This page is currently a work in progress, and it is subject to change frequently until this notice is removed.  If you have any questions, concerns or uncertainties about our engraving options, please call first before placing an engraving order.

Write your own review
  • Only registered users can write reviews
  • Bad
  • Excellent
Existing reviews
DIZZY
DIZZY
From: Michael | Date: 4/20/2017 12:59 PM
Was this review helpful? Yes No (0/1)
Rosario Armory Trust
Rosario Armory Trust
From: David | Date: 6/14/2017 9:23 PM
Was this review helpful? Yes No (0/1)
Customers who bought this item also bought

Configure Your Custom AR-15 Barrel

Build a custom AR-15 barrel
$290.00

Custom AR15 Barrel for Superlative Arms Piston Kit

Build a custom AR-15 barrel specifically for use with a Superlative Arms Piston Kit. This barrel will come with properly sized and spaced gas block journal dimples along the bottom for use with Superlative Arms' Piston Retrofit Kits. The gas port will sized appropriately as well.
$305.00