Search
Filters
Close

MAX-Terminator Muzzle Brakes

Our Maximum recoil reduction brake. Length: 3.25". Diameter: .980" -- Specified Caliber options will include a slight increase in actual diameter to allow for safe margins with passing projectiles.
*

Muzzle Brake Thread

*

Caliber for bore diameter

*
*
*

Polish or Matte

(Matte is media blasted only!)

Colors

Ship to
*
*
Shipping Method
Name
Estimated Delivery
Price
No shipping options
$110.00
$77.00

 MAX-Terminator Muzzle Brake

Our top of the line muzzle brake offering the greatest reduction in muzzle rise and recoil. This brake will tame the fiercest recoil enabling your most accurate shots.  Length: 3.25".  Diameter: .980".

MAX-Terminator Muzzle Brakes should be properly timed with a crush-washer, jam nut, peel-washer or muzzle device shim kit (not-included) so the "MAX-Terminator" logo is centered at the bottom (6 o'clock) and the opposing 8 gas ports are centered at the top (12 o'clock).

 

Stainless Steel and .980" OD only

NOT INTENDED FOR BARRELS UNDER 10" LONG THAT ARE .375cal AND LARGER FIRING MAX-PRESSURE LOADS--DAMAGE TO BRAKE MAY OCCUR IN THESE TYPES OF CONFIGURATIONS, USE AT YOUR OWN RISK!

2-3 Weeks lead time

No shipping outside the US

 If ordered alone, ships via USPS First Class Mail.

**NOTE: Regarding the 3/4"x24 and 49/64"x20 thread patterned MAX-Terminator Muzzle Brakes; as these two thread sizes on this brake do not and cannot have wrench flats for installation like the other thread sizes of MAX-Terminator Brakes, we recommend installation via a properly-sized strap wrench used around the outside of the brake.

 

For your crushwasher needs:

https://tromix.com/product/crush-washer/

or for only 1/2x28 crush washers:

https://www.joeboboutfitters.com/Crush-Washer-for-1-2X28-Barrels-p/jb-crushwasher.htm

 

For peel-washer and shim kits:

https://www.capitolarmory.com/thunder-beast-peel-washer.html

https://www.advanced-armament.com/Shim-Kit--338LM_p_469.html

https://www.wingtactical.com/firearm-parts/ar-15/muzzle-devices/spikes-tactical-muzzle-device-alignment-set-5-8x24/

http://precisionarmament.com/product/accu-washer-system/

 

NOTE: Due to variance in manufacturers' sand-blasting media from lot to lot, we cannot guarantee that the matte finish option will match your barrel's matte finish unless they are ordered at the same time on the same order.

 MAX-Terminator Muzzle Brake

Our top of the line muzzle brake offering the greatest reduction in muzzle rise and recoil. This brake will tame the fiercest recoil enabling your most accurate shots.  Length: 3.25".  Diameter: .980".

MAX-Terminator Muzzle Brakes should be properly timed with a crush-washer, jam nut, peel-washer or muzzle device shim kit (not-included) so the "MAX-Terminator" logo is centered at the bottom (6 o'clock) and the opposing 8 gas ports are centered at the top (12 o'clock).

 

Stainless Steel and .980" OD only

NOT INTENDED FOR BARRELS UNDER 10" LONG THAT ARE .375cal AND LARGER FIRING MAX-PRESSURE LOADS--DAMAGE TO BRAKE MAY OCCUR IN THESE TYPES OF CONFIGURATIONS, USE AT YOUR OWN RISK!

2-3 Weeks lead time

No shipping outside the US

 If ordered alone, ships via USPS First Class Mail.

**NOTE: Regarding the 3/4"x24 and 49/64"x20 thread patterned MAX-Terminator Muzzle Brakes; as these two thread sizes on this brake do not and cannot have wrench flats for installation like the other thread sizes of MAX-Terminator Brakes, we recommend installation via a properly-sized strap wrench used around the outside of the brake.

 

For your crushwasher needs:

https://tromix.com/product/crush-washer/

or for only 1/2x28 crush washers:

https://www.joeboboutfitters.com/Crush-Washer-for-1-2X28-Barrels-p/jb-crushwasher.htm

 

For peel-washer and shim kits:

https://www.capitolarmory.com/thunder-beast-peel-washer.html

https://www.advanced-armament.com/Shim-Kit--338LM_p_469.html

https://www.wingtactical.com/firearm-parts/ar-15/muzzle-devices/spikes-tactical-muzzle-device-alignment-set-5-8x24/

http://precisionarmament.com/product/accu-washer-system/

 

NOTE: Due to variance in manufacturers' sand-blasting media from lot to lot, we cannot guarantee that the matte finish option will match your barrel's matte finish unless they are ordered at the same time on the same order.

Write your own review
  • Only registered users can write reviews
*
*
Bad
Excellent
*
*
*
*
Customers who bought this item also bought

Barrel Nuts for Shoulderless Prefit Barrels

Stainless Steel Barrel Nuts made by Triune Precision. Available for Savage Small Shank, Remington 700 "Rem/Age", Bighorn, Mossberg Standard Action, Mossberg Small/Mini Action, Remington 783 or Ruger American. RemAge, Savage/Mossberg Standard, Ruger/Tikka nuts use 1-1/4" wrench. Mossberg Small/Mini nut uses 1-1/8" wrench.
$36.00

X-Terminator Muzzle Brakes

Extreme recoil reduction muzzle brake. Length: 2 1/2". Diameter: .980" -- Specified Caliber options will include a slight increase in actual diameter to allow for safe margins with passing projectiles.
$90.00 $63.00

Configure Your Custom LR308/DPMS Barrel

Configure your LR308/DPMS barrel
$407.00 $325.60