Search
Filters
Close

B.A.R.T 2.0

All B.A.R.T. Purchases include up to one (1) .5oz bottle of lapping compound at no extra cost per order. Step 1: Tighten BART's head in a bench vise on the "Flats" provided. Step 2: Put barrel in upper. Slide barrel nut over barrel and finger tighten barrel nut to upper. Step 3: Slide upper onto BART 2.0 until barrel extension locks onto the teeth Step 4: Tighten barrel nut to upper with barrel nut wrench to specifications stated by handguard manufacturer.
Free shipping
*

Buy 2 and save

$123.00

Now Available, B.A.R.T. 2.0 in M4E1 and M5E1 sizes to fit the new enhanced AR uppers.  They will not properly lap the standard uppers so please use the standard-sized B.A.R.T. Tools for that purpose.

All B.A.R.T. Purchases include up to one (1) .5oz bottle of lapping compound at no extra cost per order.

If ordered alone, ships via USPS Priority Mail.  If in stock, BART Tools typically receive finishing and ship within 1-2 weeks.  If not in stock for any extended period of time, certain sizes may be removed from the dropdown menu.

Barrel And Receiver Truing Tool

B.A.R.T- 2.0 is a two in one tool.  Inserted into the front end, the tool laps the face of your AR Uppers, ensuring a perfectly square and centered fit between your Barrel and Upper.

With the head of the tool secured in vise, insert the other (splined) end through the rear of the upper until the splines engage the lugs of the barrel. You are now ready to loosen or tighten the barrel nut, muzzle brake, or suppressors and install gas blocks with ease and confidence without any need to remove sights or optics.

There is NO OTHER tool on the market like it.  This one tool does the job of TWO TOOLS, literally saving you $100 or more!  If you build or own AR’s this tool is absolutely indispensable.

*NOTE: When lapping with the B.A.R.T. Tool, it is recommended to use a hand-driver and manually turn to lap your upper, and in a pinch, a power-driver/drill can be used with discretion (on low), but *DO NOT* use an impact driver as this can damage or break the bit extension on the B.A.R.T. Tool.

It is strongly advised to utilize the B.A.R.T. Tool in a horizontal fashion.  Using it vertically in combination with lapping compound can allow the compound to run inside the upper receiver's bolt-carrier channel and cause the unintentional removal of anodizing in that location. 

Check out our B.A.R.T. Tools featured in Guns & Ammo AR-15! (PDF)

 

Now Available, B.A.R.T. 2.0 in M4E1 and M5E1 sizes to fit the new enhanced AR uppers.  They will not properly lap the standard uppers so please use the standard-sized B.A.R.T. Tools for that purpose.

All B.A.R.T. Purchases include up to one (1) .5oz bottle of lapping compound at no extra cost per order.

If ordered alone, ships via USPS Priority Mail.  If in stock, BART Tools typically receive finishing and ship within 1-2 weeks.  If not in stock for any extended period of time, certain sizes may be removed from the dropdown menu.

Barrel And Receiver Truing Tool

B.A.R.T- 2.0 is a two in one tool.  Inserted into the front end, the tool laps the face of your AR Uppers, ensuring a perfectly square and centered fit between your Barrel and Upper.

With the head of the tool secured in vise, insert the other (splined) end through the rear of the upper until the splines engage the lugs of the barrel. You are now ready to loosen or tighten the barrel nut, muzzle brake, or suppressors and install gas blocks with ease and confidence without any need to remove sights or optics.

There is NO OTHER tool on the market like it.  This one tool does the job of TWO TOOLS, literally saving you $100 or more!  If you build or own AR’s this tool is absolutely indispensable.

*NOTE: When lapping with the B.A.R.T. Tool, it is recommended to use a hand-driver and manually turn to lap your upper, and in a pinch, a power-driver/drill can be used with discretion (on low), but *DO NOT* use an impact driver as this can damage or break the bit extension on the B.A.R.T. Tool.

It is strongly advised to utilize the B.A.R.T. Tool in a horizontal fashion.  Using it vertically in combination with lapping compound can allow the compound to run inside the upper receiver's bolt-carrier channel and cause the unintentional removal of anodizing in that location. 

Check out our B.A.R.T. Tools featured in Guns & Ammo AR-15! (PDF)

 

Write your own review
  • Only registered users can write reviews
*
*
Bad
Excellent
Existing reviews
Multiple Tools in One
This is an excellent tool. It is both an upper receiver lapping tool as well as a "reaction rod". Purchasing these tools separately would be added cost. The X-Caliber tool is well machined, fits well into the barrel / receiver. When used as a lapping tool it is excellent with great bore alignment and tight tolerances (Aero M5E1). I have this tool for both Aero M5 receivers and barrels as well as standard AR15. High quality and if you can catch them during one of their great site-wide sales, they're a real get.
Jason | 8/26/2019 11:25 AM
Was this review helpful? Yes No (2/0)
*
*
*
*
Customers who bought this item also bought

Lapping Compound .5 oz

For use with the X-caliber B.A.R.T Tools
$6.00

Configure Your Custom LR308/DPMS Barrel

Configure your LR308/DPMS barrel
$407.00

Rubber City Armory Bolts/Carriers/BCGs

High Quality BCG's & Bolts (Non-Stock Item). If purchased with a proper-chambered/matching AR barrel on the same order, the bolt will be head-spaced to that barrel and that barrel will receive our 1MOA or better guarantee. --NOTE: LAST 2 LINE ITEMS IN DROPDOWN MENU ARE CARRIER ONLY---NOTE: MOST CARRIERS WILL SHIP WITH X-CALIBER LASER ENGRAVING LOGO INSTEAD OF RCA's LOGO
$0.00